Asbestos Containing Materials. Prior to the commencement of any Renovations or alterations at any Property, any asbestos containing materials or suspect/presumed asbestos containing materials (collectively, “ACM”) located at such Property that has not previously been sampled and that will be subject to the Renovations or alterations shall be sampled, or, in the absence of sampling, shall be presumed to be ACM and handled and managed as such. Prior to the Renovations or alterations, any and all friable ACM and ACM that will be subject to the Renovations or alterations and is damaged or in poor condition, shall be removed by a licensed asbestos abatement contractor and disposed of off-site in compliance with applicable Environmental Laws or be sealed and fully encapsulated (if the ACM is capable of being encapsulated without further damage to the ACM) by a licensed asbestos abatement contractor, all in compliance with all applicable Environmental Laws, including all applicable ACM notice and disclosure requirements required by applicable Environmental Laws, and shall maintain all other ACM present on such Property in compliance with Environmental Laws (collectively, the “ACM Abatement Activities”). In addition, ACM Abatement Activities shall be followed for any ACM that could be disturbed by any Renovations or alterations. Asbestos post-abatement air clearance samples shall be collected following the completion of the ACM Abatement Activities involving the disturbance of more than 25 linear feet or more than 10 square feet of ACM to document that airborne ACM levels at the property are below the applicable re-occupancy clearance level (either less than or equal to 0.01 fibers per cubic centimeter or less than the ambient concentration not in excess of OSHA Permissible Exposure Limits, whichever is larger, if the phase contract microscopy monitoring and analysis method is used or the average number of asbestos structures on samples inside the abatement area is no greater than 70 structures per square millimeter (S/MM2) if the transmission electron microscopy monitoring and analysis method is used). Documentation related to asbestos surveys, abatement activities and regulatory forms shall be provided to the Agent upon request of the Agent following completion of work.

“Hazardous Materials” Defined. For purposes hereof, “Hazardous Materials” means “Hazardous Material,” “Hazardous Substance,” “Pollutant or Contaminant,” and “Petroleum” and “Natural Gas Liquids,” as those terms are defined or used in Section 101 of CERCLA, and any other substances regulated because of their effect or potential effect on public health and the environment, including, without limitation, PCBs, lead paint, asbestos, urea formaldehyde, radioactive materials, putrescible materials, and infectious materials.

Additional Offering Materials. Except in connection with the Exchange Offer or the filing of the Shelf Registration Statement, not to, and not to authorize or permit any person acting on its behalf to, # distribute any offering material in connection with the offer and sale of the Securities other than the Time of Sale Document and the Final Offering Memorandum and any Company Additional Written Communications (used in accordance with this Agreement) and any amendments and supplements to the Preliminary Offering Memorandum or the Final Offering Memorandum or any Company Additional Written Communication prepared in compliance with this Agreement, # solicit any offer to buy or offer to sell the Securities by means of any form of general

have been disposed of or otherwise released from any property, leases in real property, facilities or other interests in real property owned or held by the Company or any of its Subsidiaries (the “Real Property”) in violation of any Environmental Laws; or

Return of Materials. All of Company's trademarks, trade names, patents, copyrights, designs, drawings, formulas or other data, photographs, demonstrators, literature, and sales aids of every kind shall remain the property of Company. Within 10 days after the termination of this Agreement, Representative shall return all such items to company at Representative’s expense. Representative shall not make or retain any copies of any confidential items or information that may have been entrusted to it. Effective upon the termination of this Agreement, Representative shall cease to use all trademarks, marks and trade name of Company.

Return of Materials. At any time upon Company’s request, and when my employment with Company is over, I will return all materials (including, without limitation, documents, drawings, papers, diskettes and tapes) containing or disclosing any Proprietary Information (including all copies thereof), as well as any keys, pass cards, identification cards, computers, printers, pagers, personal digital assistants or similar items or devices that the Company has provided to me. I will provide Company with a written certification of my compliance with my obligations under this Section.

Return of Materials. Within ​ days following any expiration or termination of this Agreement, each party shall return any and all instrumentation owned by the other party, including any Confidential Information exchanged during the term of this Agreement and any copies thereof; provided that each Party may retain the Confidential Information of the other Party to the extent necessary to exercise any remaining rights or fulfill any outstanding obligations under this Agreement or the License Agreement.

Tooling, Equipment and Materials. Subject to the mutual written consent of te Parties, if applicable, ​ will be reimbursed, at cost, for any specially-required equipment and/or fixtures (collectively, “Tooling”) and improvements to equipment and Tooling purchased by ​ needed for or used in the production of the Product (“Product Tooling”) and/or to perform ​’s obligations to ​. ​ will be responsible for normal maintenance of ​’s Tooling and equipment in its possession. Equipment and Tooling paid for by ​ remains the property of ​. Expenditures greater that Five Thousand Dollars ($5,000 USD) (hereinafter “Substantive Expenditures”) within any ninety (90) day period for Tooling or equipment will be made only with the prior written authorization of ​. Any

Releases of Hazardous Materials. If any Release of any Hazardous Material in, on, under, from or about the Premises shall occur at any time during the Lease by Tenant or Tenant's Agents, in addition to notifying Landlord as specified above, Tenant, at its own sole cost and expense, shall # immediately comply with any and all reporting requirements imposed pursuant to any and all Environmental Laws, # provide a written certification to Landlord indicating that Tenant has complied with all applicable reporting requirements,

Destruction of Confidential Information and Materials. Each Party shall destroy or cause to be destroyed (or, at the other Party’s written request, return or cause to be returned) all Confidential Information of the other Party in the possession of such Party or its Affiliates or Sublicensees as of the effective date of expiration or termination (with the exception of one copy of such Confidential Information, which may be retained by the legal department of the Party that received such Confidential Information to confirm compliance with the nonuse and nondisclosure provisions of this Agreement), provided that each Party may retain and continue to use such Confidential Information of the other Party to the extent necessary to exercise any surviving rights, licenses or obligations under this Agreement. Notwithstanding the foregoing, a Party shall not be required to destroy any computer files created during automatic system back up that are subsequently stored securely by it and not readily accessible to its employees, consultants, or others who received Confidential Information under this Agreement. Each Party shall destroy or cause to be destroyed, or at the other Party’s option, return or cause to be returned to such other Party, all Materials of such other Party in its possession or its Affiliates’ or Sublicensees’ possession as of the effective date of expiration or termination.