Floor Load; Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the lesser of the floor load capacity which such floor was designed to carry or which is allowed by law after giving effect to any reinforcements to such floor performed by Tenant.

Floor Load--Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the floor load per square foot of area which such floor was designed to carry, and which is allowed by Legal Requirements. Landlord reserves the right to prescribe the weight and position of all safes, heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Heavy Equipment”), which shall be placed so as to distribute the weight. Heavy Equipment shall be placed and maintained by Tenant at Tenant’s expense in settings sufficient in Landlord’s reasonable judgment to absorb and prevent vibration, noise and annoyance. Tenant shall not move any Heavy Equipment into or out of the Building without giving Landlord prior written notice thereof and observing all of Landlord’s Rules and Regulations with respect to the same. If such Heavy Equipment requires special handling, Tenant agrees to employ only persons holding a Master Rigger’s License to do said work, and that all work in connection therewith shall comply with Legal Requirements. Any such moving shall be at the sole risk and hazard of Tenant and Tenant will defend, indemnify and save Landlord and Landlord’s agents (including without limitation its property manager), contractors and employees (collectively with Landlord, the “Landlord Parties”) harmless from and against any and all claims, damages, losses, penalties, costs, expenses and fees (including without limitation reasonable legal fees) (collectively, “Claims”) resulting directly or indirectly from such moving, except if caused by Landlord’s negligence. Proper placement of all Heavy Equipment in the Premises shall be Tenant’s responsibility.

SAFES AND OTHER HEAVY EQUIPMENT: Landlord reserves the right to prescribe the weight and position of all safes and other heavy equipment so as to distribute their weight properly and to prevent any unsafe condition from arising. Tenant will not place a load upon any floor of the Premises exceeding the floor load per square foot area which it was designed to carry or which is allowed by law.

Tenant shall not place a load upon any floor in the Premises exceeding the floor load per square foot of area which such floor was designed to carry and which is allowed by law. Landlord reserves the right to prescribe the weight and position of all business machines and mechanical equipment, including safes, which shall be placed so as to distribute the weight. Business machines and mechanical equipment shall be placed and maintained by Tenant at Tenant’s expense in settings sufficient, in Landlord’s judgment, to absorb and prevent vibration, noise and annoyance. Tenant shall not move any safe, heavy machinery, heavy equipment, freight, bulky matter or fixtures into or out of the Building without Landlord’s prior consent.

Safes, Heavy Equipment. Tenant shall not place a load upon any floor of the Leased Premises which exceeds the lesser of fifty (50) pounds per square foot live load or such other amount specified in writing by Landlord from time to time. Landlord reserves the right to prescribe the weight and position of all safes and heavy installations which Tenant wishes to place in the Leased Premises so as properly to distribute the weight thereof, or to require plans prepared by a qualified structural engineer at Tenant’s sole cost and expense for such heavy objects. Notwithstanding the foregoing, Landlord shall have no liability for any damage caused by the installation of such heavy equipment or safes.

Floor Load--Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the floor load per square foot of area which such floor was designed to carry and which is allowed by Legal Requirements. Landlord reserves the right, at the time it consents to a Tenant Alteration pursuant to Section 11.1, below, to reasonably prescribe the position of all safes, heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Heavy Equipment”), which shall be placed so as to distribute the weight and in settings designed to minimize vibration, noise and annoyance. Tenant shall not move any Heavy Equipment into or out of the Building without giving Landlord prior written notice thereof and observing all of Landlord’s Rules and Regulations with respect to the same. If such Heavy Equipment requires special handling, Tenant agrees to employ only persons holding a Master Rigger’s License to do said work, and that all work in connection therewith shall comply with Legal Requirements. Any such moving shall be at the sole risk and hazard of Tenant and Tenant will defend, indemnify and save Landlord and Landlord’s agents (including without limitation its property manager), contractors and employees (collectively with Landlord, the “Landlord Parties”) harmless from and against any and all claims, damages, losses, penalties, costs, expenses and fees (including without limitation reasonable legal fees) (collectively, “Claims”) resulting directly or indirectly from such moving. Proper placement of all Heavy Equipment in the Premises shall be Tenant’s responsibility.

Floor Load--Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the floor load per square foot of area which such floor was designed to carry and which is allowed by Legal Requirements. The floor load capacity of the Premises is # 50 lbs. per square foot live load in the areas shown on Exhibit 5-1 attached hereto and # 100 lbs. per square foot live load in the remainder of the Premises. Landlord reserves the right to prescribe the weight and position of all safes, heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Heavy Equipment”), in a commercially reasonable manner, which shall be placed so as to distribute the weight. Heavy Equipment shall be placed and maintained by Tenant at Tenant’s expense in settings sufficient in Landlord’s reasonable judgment to absorb and prevent vibration, noise and annoyance. Tenant shall not move any Heavy Equipment into or out of the Building without giving Landlord prior written notice thereof and observing all of Landlord’s Rules and Regulations with respect to the same. If such Heavy Equipment requires special handling, Tenant agrees to employ only persons holding a Master Rigger’s License to do said work, and that all work in connection therewith shall comply with Legal Requirements. Any such moving shall be at the sole risk and hazard of Tenant and Tenant will defend, indemnify and save Landlord and Landlord’s agents (including without limitation its property manager), contractors and employees (collectively with Landlord, the “Landlord Parties”) harmless from and against any and all claims, damages, losses, penalties, costs, expenses and fees (including without limitation reasonable legal fees) (collectively, “Claims”) resulting directly or indirectly from such moving, except, subject to Section 14.5 hereof, to the extent caused by the negligence or willful misconduct of any Landlord Parties. Proper placement of all Heavy Equipment in the Premises shall be Tenant’s responsibility.

Floor Load--Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the floor load per square foot of area which such floor was designed to carry and which is allowed by Legal Requirements. Landlord reserves the right to prescribe the weight and position of all safes, heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Heavy Equipment”), which shall be placed so as to distribute the weight. Heavy Equipment shall be placed and maintained by Tenant at Tenant’s expense in settings sufficient in Landlord’s reasonable judgment to absorb and prevent vibration, noise and annoyance. Tenant shall not move any Heavy Equipment into or out of the Building without giving Landlord prior written notice thereof and observing all of Landlord’s Rules and Regulations with respect to the same. If such Heavy Equipment requires special handling, Tenant agrees to employ only persons holding a Master Rigger’s License to do said work, and that all work in connection therewith shall comply with Legal Requirements. Any such moving shall be at the sole risk and hazard of Tenant and Tenant will defend, indemnify and save Landlord and Landlord’s agents (including its property manager), contractors and employees (collectively with Landlord, the “Landlord Parties”) harmless from and against any and all claims, damages, judgments, losses, penalties, costs, expenses and fees (including reasonable legal fees) (collectively, “Claims”) resulting directly or indirectly from such moving. Proper placement of all Heavy Equipment in the Premises shall be Tenant’s responsibility.

Floor Load; Heavy Equipment. Tenant shall not place a load upon any floor of the Premises exceeding the lesser of the floor load capacity which such floor was designed to carry or which is allowed by law. Landlord reserves the right to prescribe the weight and position of all heavy business machines and equipment, including safes, which shall be placed so as to distribute the weight. Business machines and mechanical equipment which cause vibration or noise shall be placed and maintained by Tenant at Tenant’s expense in settings sufficient to absorb and prevent vibration, noise and annoyance. Tenant shall not move any safe, heavy machinery, heavy equipment, freight, construction materials or fixtures into or out of the Premises without Landlord’s prior consent which consent may include a requirement to provide insurance naming Landlord, and the holder of any mortgage affecting the Property, as additional insureds, with such coverage and in such amount as Landlord reasonably requires. If any such safe, machinery, heavy equipment, freight, or fixtures requires special handling, Tenant agrees to employ only persons holding a master rigger’s license to do said work, and that all work in connection therewith shall comply with applicable laws and regulations. Any such moving shall be at the sole risk and hazard of Tenant and Tenant hereby agrees to exonerate, indemnify and save Landlord harmless against and from any liability, loss, injury, claim or suit resulting directly or indirectly from such moving. Tenant shall schedule such moving at such times as Landlord shall reasonably designate.

Floor Load. Tenant shall not place a load upon any floor of the Premises that exceeds the floor load per square foot that such floor was designed to carry and which is allowed by certificate, rule, regulation, permit or Law.