The Lessee shall not overload the cables switchboards or sub‑boards through which electricity is conveyed to the Premises.

The Lessee shall not overload the cables switchboards or sub‑boards through which electricity is conveyed to the Land or the Building.

It is understood that the electrical service for the Premises (for lights and convenience outlets) is currently separately metered from service provided to other rentable spaces and common areas of the Building, and Tenant shall make arrangements for such electrical service directly with the utility supplier.

“System” means an electric generating photovoltaic system including photovoltaic panels, racks, wiring and other electrical devices, conduit, weatherproof housings, hardware, one or more inverters, remote monitoring system, communication system, connectors, meters, disconnects, and optionally, battery storage equipment and energy management equipment, but excluding the Customer’s electrical distribution equipment

Standby Generator: provide grade mounted location for dedicated Tenant Generators and conduit risers (approx 800 KW generator). This is over and above life safety generator for building.

“System” means an electric generating photovoltaic system including photovoltaic panels, racks, wiring and other electrical devices, conduit, weatherproof housings, hardware, one or more inverters, remote monitoring system, communication system, connectors, meters, disconnects, and optionally, battery storage equipment and energy management equipment, but excluding the Customer’s electrical distribution equipment

ELECTRICAL WORK. All electrical work shall only be approved for the electrical panels located within the Premises. Additional service requirements shall be secured only by direction of Landlord.

“System” means an electric generating photovoltaic system including photovoltaic panels, racks, wiring and other electrical devices, conduit, weatherproof housings, hardware, one or more inverters, remote monitoring system, communication system, connectors, meters, disconnects, and optionally, battery storage equipment and energy management equipment, but excluding the Customer’s electrical distribution equipment

This performance criteria is intended to define the level of performance of the electrical system. The parameters used herein will form the basis of the electrical system design, equipment selection and system sizing.

Electrical. During the Term of this Lease, there shall be available to the Leased Premises electrical facilities comparable to those supplied in other comparable office buildings in the vicinity of the Building to provide sufficient power for normal lighting and office machines of similar low electrical consumption, and one personal computer for each desk station, but not for any additional computers or extraordinary data processing equipment, special lighting and any other item of electrical equipment which requires a voltage other than one hundred ten (110) volts single phase, as determined by Landlord in its sole and absolute discretion; and provided, however, that if the installation of such electrical equipment requires additional air conditioning capacity above that normally provided to tenants of the Building or above standard usage of existing capacity as determined by Landlord in its sole and absolute discretion, then the additional air conditioning installation and/or operating costs attributable thereto shall be paid by Tenant. Tenant agrees not to use any apparatus or device in, upon or about the Leased Premises which may in any way increase the amount of such electricity usually furnished or supplied to the Leased Premises, and Tenant further agrees not to connect any apparatus or device to the wires, conduits or pipes or other means by which such electricity is supplied, for the purpose of using additional or unusual amounts of electricity, without the prior written consent of Landlord. At all times, Tenant’s use of electric current shall never exceed Tenant’s share of the capacity of the feeders to the Building or the risers or wiring installation. Tenant shall not install or use or permit the installation or use in the Leased Premises of any computer or electronic data processing or ancillary equipment or any other electrical apparatus designed to operate on electrical current in excess of 110 volts and 5 amps per machine, without the prior written consent of Landlord, which may be exercised in Landlord’s sole and absolute discretion. If Tenant shall require electrical current in excess of that usually furnished or supplied for use of the Leased Premises as general office space, Tenant shall first procure the written consent of Landlord (which may be exercised in Landlord’s sole and absolute discretion) to the use thereof and Landlord or Tenant may # cause a meter to be installed in or for the Leased Premises, or # if Tenant elects not to install said meter, Landlord may reasonably estimate such excess electrical current. The cost of any meters (including, without limitation, the cost of any installation) or surveys to estimate such excess electrical current shall be paid by Tenant. Landlord’s approval of any space plan, floor plan, construction plans, specifications, or other drawings or materials regarding the construction of the Tenant Improvements or any alterations shall not be deemed or construed as consent by Landlord under this paragraph to Tenant’s use of such excess electrical current as provided above. Tenant agrees to pay to Landlord, promptly upon demand therefor, all costs of such electrical current consumed as well as an additional use charge calculated by said meters (at the rates charged for such services to the Building by the municipality or the local public utility) or the amount specified in said estimate, as the case may be, plus any additional expense incurred in keeping account of the electrical current so consumed, which additional expense Landlord shall advise Tenant within a reasonable time after request by Tenant.